Login / Signup

PCVue 10 SP2 with LON network.

 
Data Acquisition
Last Post by e.mahaut 7 years ago
2 Posts
2 Users
0 Likes
19 Views
RSS
 r.miagkov
(@r-miagkovarcinfo-com)
Posts: 30
Trusted Member
Topic starter
 

There was a problem in PCVue 10 SP2 with LON network.
The current problem is that PcVue sees all LON variables as UNVT, while they are all SNVTs.
Third-party software installed on the same PC works with LON (also through the LNS server) without comment.
The problem arose after moving the LNS server and PcVue to another virtual machine with a different OS.
There was Windows 2008 32-bit, and it became 2019 64-bit
I can send Archive with the project and the logs

 
Posted : 11/12/2019 2:08 pm
e.mahaut
 e.mahaut
(@e-mahautarcinfo-com)
Posts: 270
Member Moderator
 

Hi Roman,

First of all, PcVue 10.0 is not compatible with Windows Server 2019. The only one that could be is 12.0 Succeeding in installing PcVue on an OS does not mean that everything will be fine. Then, you have to be careful with LonWorks (LNS) Server.

it is the same issue in fact "https://www.echelon.com/software-compatibility"

Actually, the only configuration that can work is 2012 Server R2 and Open LNS (Not OK for IzoT Server) LonWorks is pretty much specific .

If variables are seen as UNVT and not SNVTs, you should also check LNS catalog (or templates in the node)

BR Edouard

This post was modified 2 years ago by LM
 
Posted : 11/12/2019 3:11 pm
Forum Jump:
  Previous Topic
Next Topic